westmag

Quality Technician

Listed by employer · Checked

Posted within 60 days ·

  • onsite
  • FullTime
  • Production
  • South San Francisco
Work arrangement
onsite
Employment
FullTime
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: ashbyChecked Original posting ↗

Requirements

2 with evidence7 unclear or unstated
Remote policy
onsite
“Provider workplace type: onsite”
From employer posting metadata
Minimum experience (years)
3
“3+ years of experience in quality inspection, preferably incoming or final inspection in a manufacturing environment.”
See matched passage in original description ↓
Employment type
FullTime
8 fields not stated in this posting
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Work authorization
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

About Westmag Westmag is the American manufacturer of drone motors and robot actuators, backed by Andreessen Horowitz, Founders Fund, Lux Capital, NFDG, Menlo Ventures, and other top investors. Westmag is committed to building and scaling in the U.S. to serve the global market. For more information, visit westmag.com. About the Role
Read full descriptionShow less description
As a Quality Technician at Westmag, you will help make sure every part we receive and every product we ship meets our standards. You will inspect incoming components such as magnets, stator laminations, magnet wire, bearings, shafts, machined housings, and PCBAs, and verify finished motors and actuators before they leave the building. Working closely with Supplier Quality, Manufacturing, and Engineering, you will catch problems early and directly protect the reliability of what Westmag ships from U.S. factories. What You'll Own Perform receiving inspection of purchased parts and raw materials using drawings, GD&T, specifications and approved sampling plans (e.g., ANSI/ASQ Z1.4). Measure dimensional and functional characteristics with calipers, micrometers, height gauges, pin and thread gauges, optical comparators and Keyence Optical Systems. Conduct first article inspections (FAI) on new parts, new suppliers, and revised drawings and document results in standard reports. Review supplier documentation, including certificates of conformance, material certifications and test reports, for completeness and accuracy. Identify, tag and segregate nonconforming incoming or finished material; write nonconformance reports (NCRs) and support Material Review Board (MRB) dispositions. Provide inspection data and evidence to Supplier Quality Engineers to support supplier corrective actions (SCARs) and root-cause investigations. Perform final inspection of finished motors and actuators, including visual, dimensional and labeling checks, and confirm required functional tests have passed before release. Verify traceability, packaging and shipping paperwork, and prepare certificates of conformance for outgoing shipments. Inspect returned products and document findings to support investigations. Maintain accurate inspection records in our ERP and MES systems and track trends in supplier quality and incoming and outgoing defect rates. Ensure inspection equipment is calibrated, maintained and used correctly, and help develop and improve inspection instructions and checklists. Required Qualifications High school diploma or GED; associate degree or technical certificate in quality, manufacturing or engineering discipline is a plus. 3+ years of experience in quality inspection, preferably incoming or final inspection in a manufacturing environment. Ability to read and interpret engineering drawings, including GD&T. Hands-on proficiency with precision measurement tools such as calipers, micrometers, height gauges and pin and thread gauges. Working knowledge of sampling plans, nonconformance reporting and quality management systems such as ISO 9001. Strong attention to detail and disciplined, accurate documentation habits. Clear written and verbal communication skills, with the ability to work with suppliers and cross-functional teams. Authorized to work in the United States. Preferred Qualifications Experience programming or operating a Keyence Optical, Zeiss CMM (e.g., PC-DMIS, Calypso) or vision measurement system. Experience inspecting electromechanical components such as magnets, laminations, bearings, wire or PCBAs. ASQ certification such as Certified Quality Technician (CQT) or Certified Quality Inspector (CQI). Familiarity with AS9100 or IATF 16949 environments and first article inspection standards such as AS9102. Experience with ERP or MES systems for inspection records and inventory holds. Westmag is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, sex, national origin, disability, gender identity, sexual orientation, or protected veteran status.
Original formatting and links

About Westmag

Westmag is the American manufacturer of drone motors and robot actuators, backed by Andreessen Horowitz, Founders Fund, Lux Capital, NFDG, Menlo Ventures, and other top investors. Westmag is committed to building and scaling in the U.S. to serve the global market. For more information, visit westmag.com.

About the Role

As a Quality Technician at Westmag, you will help make sure every part we receive and every product we ship meets our standards. You will inspect incoming components such as magnets, stator laminations, magnet wire, bearings, shafts, machined housings, and PCBAs, and verify finished motors and actuators before they leave the building. Working closely with Supplier Quality, Manufacturing, and Engineering, you will catch problems early and directly protect the reliability of what Westmag ships from U.S. factories.

What You'll Own

  • Perform receiving inspection of purchased parts and raw materials using drawings, GD&T, specifications and approved sampling plans (e.g., ANSI/ASQ Z1.4).

  • Measure dimensional and functional characteristics with calipers, micrometers, height gauges, pin and thread gauges, optical comparators and Keyence Optical Systems.

  • Conduct first article inspections (FAI) on new parts, new suppliers, and revised drawings and document results in standard reports.

  • Review supplier documentation, including certificates of conformance, material certifications and test reports, for completeness and accuracy.

  • Identify, tag and segregate nonconforming incoming or finished material; write nonconformance reports (NCRs) and support Material Review Board (MRB) dispositions.

  • Provide inspection data and evidence to Supplier Quality Engineers to support supplier corrective actions (SCARs) and root-cause investigations.

  • Perform final inspection of finished motors and actuators, including visual, dimensional and labeling checks, and confirm required functional tests have passed before release.

  • Verify traceability, packaging and shipping paperwork, and prepare certificates of conformance for outgoing shipments.

  • Inspect returned products and document findings to support investigations.

  • Maintain accurate inspection records in our ERP and MES systems and track trends in supplier quality and incoming and outgoing defect rates.

  • Ensure inspection equipment is calibrated, maintained and used correctly, and help develop and improve inspection instructions and checklists.

Required Qualifications

  • High school diploma or GED; associate degree or technical certificate in quality, manufacturing or engineering discipline is a plus.

  • 3+ years of experience in quality inspection, preferably incoming or final inspection in a manufacturing environment.

  • Ability to read and interpret engineering drawings, including GD&T.

  • Hands-on proficiency with precision measurement tools such as calipers, micrometers, height gauges and pin and thread gauges.

  • Working knowledge of sampling plans, nonconformance reporting and quality management systems such as ISO 9001.

  • Strong attention to detail and disciplined, accurate documentation habits.

  • Clear written and verbal communication skills, with the ability to work with suppliers and cross-functional teams.

  • Authorized to work in the United States.

Preferred Qualifications

  • Experience programming or operating a Keyence Optical, Zeiss CMM (e.g., PC-DMIS, Calypso) or vision measurement system.

  • Experience inspecting electromechanical components such as magnets, laminations, bearings, wire or PCBAs.

  • ASQ certification such as Certified Quality Technician (CQT) or Certified Quality Inspector (CQI).

  • Familiarity with AS9100 or IATF 16949 environments and first article inspection standards such as AS9102.

  • Experience with ERP or MES systems for inspection records and inventory holds.

Westmag is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, sex, national origin, disability, gender identity, sexual orientation, or protected veteran status.

No similar roles found yet — browse all westmag jobs.

THE JOB ELIGIBILITY CHECKER

Check a job