Electrical Engineer (Prism)
Listed by employer · Checked
Posted within 60 days ·
- Work arrangement
- Not stated
- Employment
- FullTime
- Stated compensation
- USD 125,000–145,000 1 YEAR
- Stated sponsorship
- Not stated
Does the location policy fit?
Choose where you would work from. We’ll compare it with the posting’s stated requirements.
Not enough information in this posting — confirm with the employer
Checked for applicants in Aruba; employer sponsorship is needed. Based on the source posting · not a hiring or work-authorization guarantee.
The posting does not specify whether applicants from your country are accepted.
Why this result?
4 still unclear
- The posting does not specify whether applicants from your country are accepted.
- Visa sponsorship is not specified.
- Existing work authorization is required. Country of residence does not establish your authorization.
- The posting states a citizenship-related condition or alternative that has not been assessed for you.
This checks the posting’s stated requirements, not your legal right to work. Confirm details with the employer.
Requirements
3 with evidence6 unclear or unstated- Citizenship requirement
- required: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
“To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.”
See matched passage in original description ↓ - Minimum experience (years)
- 3
“3-4 years of professional experience designing electronics hardware, with ownership of boards from schematic through bring-up”
See matched passage in original description ↓ - Work authorization
- or eligible to obtain the required authorizations from the U.S. Department of State.
“or eligible to obtain the required authorizations from the U.S. Department of State.”
See matched passage in original description ↓ - Employment type
- FullTime
- Compensation
- USD 125,000–145,000 1 YEAR
6 fields not stated in this posting
- Remote policy
- Unclear
- Employer sponsorship
- Not specified
- Geographic scope
- Not specified
- Degree requirement
- Not specified
- Security clearance
- Not mentioned
- Timezone / hours
- Not specified
These details were not stated in the tracked posting. Confirm with the employer.
Original job description
Reading view uses normalized posting text so exact evidence excerpts can be highlighted.
Show less description
Original formatting and links
About Northwood:
Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it.
Role:
Northwood is looking for an Electrical Engineer to own the non-RF electronics design for Prism, our 2.4-meter parabolic antenna for high-throughput satellite links. You will design the digital compute, power, embedded, and mixed-signal hardware that sits alongside Prism's RF chain- from block diagram and component selection through schematic, layout, bring-up, and production release.
Responsibilities
Own the electrical design of Prism's non-RF electronics: high-speed digital, power electronics, embedded control, and mixed-signal circuits
Architect and design high-density boards built around FPGAs, microcontrollers, high-speed data converters, and their peripherals, including DDR memory, multi-gigabit SerDes, and 10/100G Ethernet
Define clocking architectures: reference selection, clock distribution, jitter budgets, and synchronization across boards and subsystems
Design power trees end to end, from input power and conversion stages to point-of-load regulators, sequencing, monitoring, and protection
Design mixed-signal interfaces between digital and analog/RF domains, including ADC/DAC front ends, control loops, and sensor and telemetry circuits
Drive schematic capture, define PCB stack-ups, and lead layout of complex multilayer boards with a focus on signal integrity, power integrity, and EMI/EMC
Lead board bring-up and design verification, characterizing performance in the lab and iterating designs for performance, cost, and manufacturability
Basic Qualifications
Bachelor's degree in electrical engineering or a related engineering discipline
3-4 years of professional experience designing electronics hardware, with ownership of boards from schematic through bring-up
Hands-on design experience with high-speed digital systems built around FPGAs and/or microcontrollers
Experience designing board-level clocking and power distribution for complex digital systems
Proficiency in schematic capture, PCB stack-up definition, and layout of complex multilayer boards
Working knowledge of signal integrity, power integrity, and EMI/EMC design practices
Preferred Qualifications
Design experience with dense, high-pin-count FPGAs (e.g., AMD/Xilinx UltraScale+ or RFSoC) and the DDR, SerDes, and JESD204B/C interfaces around them
Low-jitter clock design: PLLs, jitter cleaners, clock fan-out, and clocking for high-speed data converters
Power electronics design: DC-DC converters, multiphase and point-of-load regulators, sequencing, hot-swap, and protection circuits
Embedded hardware design for microcontroller-based control and monitoring, with common interfaces such as I2C, SPI, UART, CAN, and Ethernet
Mixed-signal design, including precision analog, data converter front ends, and sensor interfaces
Lab skills with oscilloscopes, spectrum and network analyzers, and electronic loads, plus soldering and hot air rework
Python (or similar) for test automation and data analysis
Additional Information:
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Northwood Space is an Equal Opportunity Employer; employment with Northwood Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know at accommodations@northwoodspace.io
Matched by role category. Review each posting’s requirements before applying.
Explore stated remote geography
These collections reflect applicant location statements, not authorization or citizenship.
