NorthwoodSpace

Electrical Engineer (Prism)

Listed by employer · Checked

Posted within 60 days ·

  • Workplace not specified
  • FullTime
  • Engineering
  • Torrance, CA
Work arrangement
Not stated
Employment
FullTime
Stated compensation
USD 125,000–145,000 1 YEAR
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: ashbyChecked Original posting ↗

Requirements

3 with evidence6 unclear or unstated
Citizenship requirement
required: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
“To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.”
See matched passage in original description ↓
Minimum experience (years)
3
“3-4 years of professional experience designing electronics hardware, with ownership of boards from schematic through bring-up”
See matched passage in original description ↓
Work authorization
or eligible to obtain the required authorizations from the U.S. Department of State.
“or eligible to obtain the required authorizations from the U.S. Department of State.”
See matched passage in original description ↓
Employment type
FullTime
Compensation
USD 125,000–145,000 1 YEAR
6 fields not stated in this posting
Remote policy
Unclear
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

About Northwood: Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it. Role:
Read full descriptionShow less description
Northwood is looking for an Electrical Engineer to own the non-RF electronics design for Prism, our 2.4-meter parabolic antenna for high-throughput satellite links. You will design the digital compute, power, embedded, and mixed-signal hardware that sits alongside Prism's RF chain- from block diagram and component selection through schematic, layout, bring-up, and production release.  Responsibilities Own the electrical design of Prism's non-RF electronics: high-speed digital, power electronics, embedded control, and mixed-signal circuits Architect and design high-density boards built around FPGAs, microcontrollers, high-speed data converters, and their peripherals, including DDR memory, multi-gigabit SerDes, and 10/100G Ethernet Define clocking architectures: reference selection, clock distribution, jitter budgets, and synchronization across boards and subsystems Design power trees end to end, from input power and conversion stages to point-of-load regulators, sequencing, monitoring, and protection Design mixed-signal interfaces between digital and analog/RF domains, including ADC/DAC front ends, control loops, and sensor and telemetry circuits Drive schematic capture, define PCB stack-ups, and lead layout of complex multilayer boards with a focus on signal integrity, power integrity, and EMI/EMC Lead board bring-up and design verification, characterizing performance in the lab and iterating designs for performance, cost, and manufacturability  Basic Qualifications Bachelor's degree in electrical engineering or a related engineering discipline 3-4 years of professional experience designing electronics hardware, with ownership of boards from schematic through bring-up Hands-on design experience with high-speed digital systems built around FPGAs and/or microcontrollers Experience designing board-level clocking and power distribution for complex digital systems Proficiency in schematic capture, PCB stack-up definition, and layout of complex multilayer boards Working knowledge of signal integrity, power integrity, and EMI/EMC design practices  Preferred Qualifications Design experience with dense, high-pin-count FPGAs (e.g., AMD/Xilinx UltraScale+ or RFSoC) and the DDR, SerDes, and JESD204B/C interfaces around them Low-jitter clock design: PLLs, jitter cleaners, clock fan-out, and clocking for high-speed data converters Power electronics design: DC-DC converters, multiphase and point-of-load regulators, sequencing, hot-swap, and protection circuits Embedded hardware design for microcontroller-based control and monitoring, with common interfaces such as I2C, SPI, UART, CAN, and Ethernet Mixed-signal design, including precision analog, data converter front ends, and sensor interfaces Lab skills with oscilloscopes, spectrum and network analyzers, and electronic loads, plus soldering and hot air rework Python (or similar) for test automation and data analysis Additional Information: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Northwood Space is an Equal Opportunity Employer; employment with Northwood Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know at accommodations@northwoodspace.io
Original formatting and links

About Northwood:

Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it.

Role:
Northwood is looking for an Electrical Engineer to own the non-RF electronics design for Prism, our 2.4-meter parabolic antenna for high-throughput satellite links. You will design the digital compute, power, embedded, and mixed-signal hardware that sits alongside Prism's RF chain- from block diagram and component selection through schematic, layout, bring-up, and production release.

 

Responsibilities

  • Own the electrical design of Prism's non-RF electronics: high-speed digital, power electronics, embedded control, and mixed-signal circuits

  • Architect and design high-density boards built around FPGAs, microcontrollers, high-speed data converters, and their peripherals, including DDR memory, multi-gigabit SerDes, and 10/100G Ethernet

  • Define clocking architectures: reference selection, clock distribution, jitter budgets, and synchronization across boards and subsystems

  • Design power trees end to end, from input power and conversion stages to point-of-load regulators, sequencing, monitoring, and protection

  • Design mixed-signal interfaces between digital and analog/RF domains, including ADC/DAC front ends, control loops, and sensor and telemetry circuits

  • Drive schematic capture, define PCB stack-ups, and lead layout of complex multilayer boards with a focus on signal integrity, power integrity, and EMI/EMC

  • Lead board bring-up and design verification, characterizing performance in the lab and iterating designs for performance, cost, and manufacturability

 

Basic Qualifications

  • Bachelor's degree in electrical engineering or a related engineering discipline

  • 3-4 years of professional experience designing electronics hardware, with ownership of boards from schematic through bring-up

  • Hands-on design experience with high-speed digital systems built around FPGAs and/or microcontrollers

  • Experience designing board-level clocking and power distribution for complex digital systems

  • Proficiency in schematic capture, PCB stack-up definition, and layout of complex multilayer boards

  • Working knowledge of signal integrity, power integrity, and EMI/EMC design practices

 

Preferred Qualifications

  • Design experience with dense, high-pin-count FPGAs (e.g., AMD/Xilinx UltraScale+ or RFSoC) and the DDR, SerDes, and JESD204B/C interfaces around them

  • Low-jitter clock design: PLLs, jitter cleaners, clock fan-out, and clocking for high-speed data converters

  • Power electronics design: DC-DC converters, multiphase and point-of-load regulators, sequencing, hot-swap, and protection circuits

  • Embedded hardware design for microcontroller-based control and monitoring, with common interfaces such as I2C, SPI, UART, CAN, and Ethernet

  • Mixed-signal design, including precision analog, data converter front ends, and sensor interfaces

  • Lab skills with oscilloscopes, spectrum and network analyzers, and electronic loads, plus soldering and hot air rework

  • Python (or similar) for test automation and data analysis

Additional Information:

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Northwood Space is an Equal Opportunity Employer; employment with Northwood Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know at accommodations@northwoodspace.io

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job