Amca

EHS Engineer

Listed by employer · Checked

Posted within 60 days ·

  • Workplace not specified
  • Production Operations
  • El Segudo, CA
  • El Segundo, California, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗

Requirements

2 with evidence7 unclear or unstated
Remote policy
onsite
“This position is 5 days a week onsite in El Segundo, CA, with up to 20% travel to other Amca sites.”
See matched passage in original description ↓
Minimum experience (years)
3
“3+ years of EHS experience in a manufacturing environment”
See matched passage in original description ↓
9 fields not stated in this posting
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

There was a time when all of America believed that the future of the physical world could be radically different. The engineers of the mid-1900s put a man on the moon in eight years, designed and built planes and submarines from scratch in under three, and conceived of building things we wouldn’t even be able to dream up today. Today, the last of the engineers who imagined and built these systems are retiring. As they go, we lose not only the engineering knowledge gained from their decades of imagination and trial-and-error, but also the spirit that made that imagination possible. Amca is working day-in and day-out to restore America’s ability to engineer anything that our critical systems depend on, and reinvigorate the cycle of creation that allows imagination to shape physical reality. We rapidly develop and manufacture new critical components and subsystems required to build and sustain the planes, military vehicles, and core infrastructure America needs. By restoring the capability of our antiquated supply chains, we increase the country’s capacity to imagine and realize new systems, and make a physical world that looks very different from today.
Read full descriptionShow less description
Overview  The EHS (Environment, Health & Safety) Engineer builds and implements the EHS program across all Amca sites. The role is based at Protoshop, Amca's R&D and production factory, which runs a wide range of machinery and test equipment. Responsibilities include initial site evaluations, safety plans, and training at each site. This position is 5 days a week onsite in El Segundo, CA, with up to 20% travel to other Amca sites.  Responsibilities  Implement EHS across all Amca sites: perform initial site evaluations, establish site-specific safety plans and training, and drive gap closure to a common standard  Own OSHA and Cal/OSHA compliance across sites, including the Injury and Illness Prevention Program (IIPP), written safety programs, inspections, and recordkeeping  Conduct hazard assessments for existing operations and every new piece of equipment or process, and define required controls and PPE  Own the hazardous materials program: chemical approval, SDS management, hazard communication, storage, labeling, and hazardous waste disposal  Lead incident investigations and drive safety tickets to closure with root cause and corrective action  Build and deliver safety training (ex. new-hire, hazmat, PPE, lockout/tagout, electrical and high-voltage safety, pressure safety) and track completion in Amca's training system  Manage environmental and safety permits, regulatory reporting, and agency inspections  Partner with shop leadership, facilities, and engineering so safety is designed into new equipment, layouts, and buildouts  Track safety metrics and report trends and priority actions to leadership  Basic Qualifications  3+ years of EHS experience in a manufacturing environment  Working knowledge of Cal/OSHA or federal OSHA regulations, hazard communication, and hazardous waste requirements  Experience writing safety programs, conducting hazard assessments, and leading incident investigations  Experience developing and delivering safety training  Willingness to travel to other Amca sites up to 20% of the time  Preferred Qualifications  Bachelor's degree in occupational safety, environmental, chemical, mechanical, or industrial engineering, or a related field  Safety certification such as ASP, CSP, or CHST  Experience with electrical safety (NFPA 70E), machine guarding, lockout/tagout, and chemical processes such as potting and solvents  Experience in aerospace, defense, or other regulated manufacturing  Experience implementing or scaling an EHS program across multiple sites  Annual Salary Range$105,000—$150,000 USDThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or. any individual who is granted U.S. permanent residence ("Green Card" holder); or. any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3). Amca, Inc prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.
Original formatting and links

There was a time when all of America believed that the future of the physical world could be radically different. The engineers of the mid-1900s put a man on the moon in eight years, designed and built planes and submarines from scratch in under three, and conceived of building things we wouldn’t even be able to dream up today.

Today, the last of the engineers who imagined and built these systems are retiring. As they go, we lose not only the engineering knowledge gained from their decades of imagination and trial-and-error, but also the spirit that made that imagination possible.

Amca is working day-in and day-out to restore America’s ability to engineer anything that our critical systems depend on, and reinvigorate the cycle of creation that allows imagination to shape physical reality. We rapidly develop and manufacture new critical components and subsystems required to build and sustain the planes, military vehicles, and core infrastructure America needs. By restoring the capability of our antiquated supply chains, we increase the country’s capacity to imagine and realize new systems, and make a physical world that looks very different from today.

Overview 

The EHS (Environment, Health & Safety) Engineer builds and implements the EHS program across all Amca sites. The role is based at Protoshop, Amca's R&D and production factory, which runs a wide range of machinery and test equipment. Responsibilities include initial site evaluations, safety plans, and training at each site. This position is 5 days a week onsite in El Segundo, CA, with up to 20% travel to other Amca sites. 

Responsibilities 

  • Implement EHS across all Amca sites: perform initial site evaluations, establish site-specific safety plans and training, and drive gap closure to a common standard 
  • Own OSHA and Cal/OSHA compliance across sites, including the Injury and Illness Prevention Program (IIPP), written safety programs, inspections, and recordkeeping 
  • Conduct hazard assessments for existing operations and every new piece of equipment or process, and define required controls and PPE 
  • Own the hazardous materials program: chemical approval, SDS management, hazard communication, storage, labeling, and hazardous waste disposal 
  • Lead incident investigations and drive safety tickets to closure with root cause and corrective action 
  • Build and deliver safety training (ex. new-hire, hazmat, PPE, lockout/tagout, electrical and high-voltage safety, pressure safety) and track completion in Amca's training system 
  • Manage environmental and safety permits, regulatory reporting, and agency inspections 
  • Partner with shop leadership, facilities, and engineering so safety is designed into new equipment, layouts, and buildouts 
  • Track safety metrics and report trends and priority actions to leadership 

Basic Qualifications 

  • 3+ years of EHS experience in a manufacturing environment 
  • Working knowledge of Cal/OSHA or federal OSHA regulations, hazard communication, and hazardous waste requirements 
  • Experience writing safety programs, conducting hazard assessments, and leading incident investigations 
  • Experience developing and delivering safety training 
  • Willingness to travel to other Amca sites up to 20% of the time 

Preferred Qualifications 

  • Bachelor's degree in occupational safety, environmental, chemical, mechanical, or industrial engineering, or a related field 
  • Safety certification such as ASP, CSP, or CHST 
  • Experience with electrical safety (NFPA 70E), machine guarding, lockout/tagout, and chemical processes such as potting and solvents 
  • Experience in aerospace, defense, or other regulated manufacturing 
  • Experience implementing or scaling an EHS program across multiple sites 
Annual Salary Range$105,000—$150,000 USD

This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or. any individual who is granted U.S. permanent residence ("Green Card" holder); or. any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3).

Amca, Inc prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.

Similar roles

All Amca jobs →

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job