ALTEN Technology USA

Tooling Design Engineer - Aerospace Manufacturing

Listed by employer · Checked

Posted within 60 days ·

  • Workplace not specified
  • Engineering
  • Lansing, Michigan, United States
  • Troy, Michigan, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗

Requirements

3 with evidence6 unclear or unstated
Citizenship requirement
required: citizenship is required for this position; • only U.S. citizens are authorized to access and handle sensitive data required to support our government and military programs.
“citizenship is required for this position;”
See matched passage in original description ↓
Minimum experience (years)
10
“A degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of tooling design experience”
See matched passage in original description ↓
Work authorization
only U.S. citizens are authorized to access and handle sensitive data required to support our government and military programs.
“only U.S. citizens are authorized to access and handle sensitive data required to support our government and military programs.”
See matched passage in original description ↓
8 fields not stated in this posting
Remote policy
Unclear
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
Job Description: ALTEN Technology is excited to announce an opening for a Tooling Design Engineer. The role will be responsible for day-to-day tooling design and development support for production tooling aids. The focus is on designing and developing tools, tooling, gauges, and tooling production aids to support new and existing production processes. Key Responsibilities: Design and develop new tools, tooling, gauging, and other tooling aids to support production operations. Create designs and drawings using Computer Aided Design (CAD) software. Analize tooling performance and adjust designs accordingly to improve performance. Design tooling for CNC machining, turning, and additive manufacturing methods. Review technical manufacturing specifications to determine tooling requirements. Design for ergonomics when appropriate Collaborate with team members to develop design solutions for production support. Evaluate tooling/gauge/aid performance to determine for-use worthiness. Investigates and troubleshoots process issues. Provides technical support to operations. Consult with outside engineering entities when required to resolve issues. Coordinates multiple design projects. Provide technical support and guidance to internal and external vendors during tooling fabrication. Analyze process data in support of continuous improvement. Basic Qualifications: A degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of tooling design experience 10 years of experience using 3D modeling CAD software Siemens NX / Teamcenter Experience Experience working with CAD assemblies. Good understanding of Engineering Drawings and Geometric Dimensioning and Tolerancing Strong analytical skills using appropriate logic and reasoning for design solutions. Experience conducting design reviews. Strong communication and teamwork skills. Attention to detail. Strong creativity and innovation skills. Proficiency with Microsoft O365 suite. US. citizenship is required for this position; only U.S. citizens are authorized to access and handle sensitive data required to support our government and military programs. Preferred Qualifications: Aerospace Maintenance Repair and Overhaul (MRO) experience Understanding of Lean Manufacturing principles, experience with Kaizen events or experience with a continuous improvement program (6s, etc.). Experience with composite materials All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

Job Description:

  • ALTEN Technology is excited to announce an opening for a Tooling Design Engineer.
  • The role will be responsible for day-to-day tooling design and development support for production tooling aids.
  • The focus is on designing and developing tools, tooling, gauges, and tooling production aids to support new and existing production processes.

Key Responsibilities:

  • Design and develop new tools, tooling, gauging, and other tooling aids to support production operations.
  • Create designs and drawings using Computer Aided Design (CAD) software.
  • Analize tooling performance and adjust designs accordingly to improve performance.
  • Design tooling for CNC machining, turning, and additive manufacturing methods.
  • Review technical manufacturing specifications to determine tooling requirements.
  • Design for ergonomics when appropriate
  • Collaborate with team members to develop design solutions for production support.
  • Evaluate tooling/gauge/aid performance to determine for-use worthiness.
  • Investigates and troubleshoots process issues.
  • Provides technical support to operations.
  • Consult with outside engineering entities when required to resolve issues.
  • Coordinates multiple design projects.
  • Provide technical support and guidance to internal and external vendors during tooling fabrication.
  • Analyze process data in support of continuous improvement.

Basic Qualifications:

  • A degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of tooling design experience
  • 10 years of experience using 3D modeling CAD software
  • Siemens NX / Teamcenter Experience
  • Experience working with CAD assemblies.
  • Good understanding of Engineering Drawings and Geometric Dimensioning and Tolerancing
  • Strong analytical skills using appropriate logic and reasoning for design solutions.
  • Experience conducting design reviews.
  • Strong communication and teamwork skills.
  • Attention to detail.
  • Strong creativity and innovation skills.
  • Proficiency with Microsoft O365 suite.
  • US. citizenship is required for this position; only U.S. citizens are authorized to access and handle sensitive data required to support our government and military programs.

Preferred Qualifications:

  • Aerospace Maintenance Repair and Overhaul (MRO) experience
  • Understanding of Lean Manufacturing principles, experience with Kaizen events or experience with a continuous improvement program (6s, etc.).
  • Experience with composite materials

 

 

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job