ALTEN Technology USA

Principal CAD Designer

Listed by employer · Checked

Posted within 60 days ·

  • Workplace not specified
  • Engineering
  • Westminster, CO
  • Dallas, Texas, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗

Requirements

1 with evidence8 unclear or unstated
Citizenship requirement
required: Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.
“Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.”
See matched passage in original description ↓
10 fields not stated in this posting
Remote policy
Unclear
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Minimum experience (years)
Not specified
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
As the Principal CAD Designer you will be responsible for; Provide advanced CAD drafting and design support throughout the product development lifecycle using SolidWorks. Generate, modify, and maintain detailed 3D models, assemblies, engineering drawings, and associated technical documentation. Ensure drawings and models comply with engineering standards, drafting practices, GD&T requirements, and documentation procedures. Collaborate closely with engineering, manufacturing, quality, and program teams to support design development and product release activities. Support prototype, development, and production design updates. Manage and maintain mechanical CAD files, engineering drawings, and digital design documentation within Product Data Management (PDM) systems. Administer file structures, version control, and drawing release processes within SolidWorks PDM. Prepare, process, and implement Engineering Change Orders (ECOs) and Engineering Change Requests (ECRs). Maintain accurate Bill of Materials (BOM) structures and associated hardware configurations. Ensure proper configuration control and traceability of engineering documentation. Review CAD models and drawings for completeness, manufacturability, accuracy, and compliance with design requirements. Identify design issues, drawing discrepancies, and configuration conflicts, and support corrective actions. Partner with engineers and cross-functional teams to resolve technical drafting and documentation concerns. Support root cause analysis and corrective action efforts related to drawing or documentation issues. Drive standardization and continuous improvement of CAD processes, templates, libraries, and documentation workflows. Assist in developing drafting standards, best practices, and internal design procedures. Provide technical guidance and mentorship to junior designers and drafters. Support departmental initiatives focused on efficiency, data integrity, and documentation quality. Qualifications; Associate degree or technical certification in Drafting, Design Technology, Mechanical Design, Engineering Technology, or a related field preferred. 7+ years of progressive CAD design and drafting experience in a manufacturing, engineering, aerospace, or product development environment. Advanced proficiency in SolidWorks, including part modeling, assemblies, and engineering drawing creation. Strong understanding of GD&T, mechanical drafting standards, and engineering documentation best practices. Proficiency with drafting and diagramming tools such as DraftSight, Lucidchart, Draw.io, or similar applications. Experience with issue tracking and workflow management tools such as Jira or equivalent systems. Working knowledge of engineering change control processes and configuration management principles. Ability to interpret engineering specifications, manufacturing requirements, and technical documentation. Experience creating and managing BOMs and associated hardware documentation. Exposure to ERP and PLM systems, including platforms such as SAP, Windchill, ENOVIA, or similar solutions. Strong troubleshooting, analytical, and problem-solving skills. Exceptional attention to detail, organization, and commitment to documentation accuracy. Salary Range: $97K-$115K The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience  Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

As the Principal CAD Designer you will be responsible for;

  • Provide advanced CAD drafting and design support throughout the product development lifecycle using SolidWorks.
  • Generate, modify, and maintain detailed 3D models, assemblies, engineering drawings, and associated technical documentation.
  • Ensure drawings and models comply with engineering standards, drafting practices, GD&T requirements, and documentation procedures.
  • Collaborate closely with engineering, manufacturing, quality, and program teams to support design development and product release activities.
  • Support prototype, development, and production design updates.
  • Manage and maintain mechanical CAD files, engineering drawings, and digital design documentation within Product Data Management (PDM) systems.
  • Administer file structures, version control, and drawing release processes within SolidWorks PDM.
  • Prepare, process, and implement Engineering Change Orders (ECOs) and Engineering Change Requests (ECRs).
  • Maintain accurate Bill of Materials (BOM) structures and associated hardware configurations.
  • Ensure proper configuration control and traceability of engineering documentation.
  • Review CAD models and drawings for completeness, manufacturability, accuracy, and compliance with design requirements.
  • Identify design issues, drawing discrepancies, and configuration conflicts, and support corrective actions.
  • Partner with engineers and cross-functional teams to resolve technical drafting and documentation concerns.
  • Support root cause analysis and corrective action efforts related to drawing or documentation issues.
  • Drive standardization and continuous improvement of CAD processes, templates, libraries, and documentation workflows.
  • Assist in developing drafting standards, best practices, and internal design procedures.
  • Provide technical guidance and mentorship to junior designers and drafters.
  • Support departmental initiatives focused on efficiency, data integrity, and documentation quality.

Qualifications;

  • Associate degree or technical certification in Drafting, Design Technology, Mechanical Design, Engineering Technology, or a related field preferred.
  • 7+ years of progressive CAD design and drafting experience in a manufacturing, engineering, aerospace, or product development environment.
  • Advanced proficiency in SolidWorks, including part modeling, assemblies, and engineering drawing creation.
  • Strong understanding of GD&T, mechanical drafting standards, and engineering documentation best practices.
  • Proficiency with drafting and diagramming tools such as DraftSight, Lucidchart, Draw.io, or similar applications.
  • Experience with issue tracking and workflow management tools such as Jira or equivalent systems.
  • Working knowledge of engineering change control processes and configuration management principles.
  • Ability to interpret engineering specifications, manufacturing requirements, and technical documentation.
  • Experience creating and managing BOMs and associated hardware documentation.
  • Exposure to ERP and PLM systems, including platforms such as SAP, Windchill, ENOVIA, or similar solutions.
  • Strong troubleshooting, analytical, and problem-solving skills.
  • Exceptional attention to detail, organization, and commitment to documentation accuracy.

 

 

Salary Range: $97K-$115K

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

No similar roles found yet — browse all ALTEN Technology USA jobs.

THE JOB ELIGIBILITY CHECKER

Check a job