ALTEN Technology USA

Mechanical Engineer II

Listed by employer · Checked

Older posting · still listed ·

  • Workplace not specified
  • Aerospace
  • Twinsburg, Ohio, United States
  • Greensboro, North Carolina, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗
This is an older posting.

The employer’s posting date is more than 60 days ago. It remained listed at our last successful check; it may be a long-running or evergreen opening. Confirm availability on the original posting before applying.

Browse jobs posted in the past 60 days →

Requirements

0 with evidence9 unclear or unstated
11 fields not stated in this posting
Remote policy
Unclear
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Minimum experience (years)
Not specified
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
Position Summary We are seeking a Mechanical Engineer II to support the design, development, and validation of mechanical hardware used in power conversion systems, electronic control units, and other advanced electronic products. In this role, you will contribute throughout the product lifecycle, from initial concept and proposal development through product testing, manufacturing support, and continuous improvement. The ideal candidate has experience designing mechanical components for electronic assemblies and enjoys working in a collaborative engineering environment. Key Responsibilities Develop mechanical designs for electronic enclosures, mounting systems, and structural components that satisfy customer specifications, performance goals, and manufacturing requirements. Create and maintain detailed 3D CAD models and production drawings while applying engineering principles such as tolerance analysis and dimensional control. Design products in accordance with applicable engineering standards, including GD&T, design for manufacturability (DFM), and company design practices. Participate in design reviews and cross-functional engineering meetings, providing technical feedback to improve product performance, manufacturability, quality, and reliability. Support engineering programs by completing assigned work within established project schedules and budget expectations. Review technical documentation and customer requirements while contributing to engineering estimates, design documentation, bills of materials, validation plans, qualification procedures, and technical reports. Investigate engineering challenges associated with existing products and new developments, recommending practical solutions to technical issues. Provide regular project updates to engineering leadership, identifying potential risks and recommending mitigation strategies when appropriate. Assist with product verification activities, prototype evaluations, and engineering testing for both new and existing designs. Promote a safe working environment by following established health, safety, and environmental policies and supporting continuous improvement initiatives. Travel occasionally within the United States and internationally (typically one to two trips annually) as project needs require. Support project schedules that may occasionally require overtime or evening work during critical development phases. Required Qualifications Bachelor's degree in Mechanical Engineering or a related engineering discipline. Minimum of three years of experience in mechanical product design within a manufacturing or new product development environment. This position requires access to export-controlled information. Applicants must qualify as a U.S. Person in accordance with U.S. export control regulations (ITAR/EAR). Required Skills Strong understanding of mechanical engineering fundamentals and product design practices. Experience creating and interpreting engineering drawings, including the application of GD&T. Proficiency using 3D CAD software to develop components, assemblies, and manufacturing drawings. Ability to apply sound engineering judgment and analytical thinking to technical challenges. Effective problem-solving and troubleshooting abilities. Strong communication and interpersonal skills with the ability to collaborate across engineering, manufacturing, and customer teams. Well-organized with the ability to manage multiple priorities and maintain accurate technical documentation. Proficient with Microsoft Office applications. Experience using standard mechanical measuring instruments and basic shop tools. Experience using CATIA for mechanical design. Background designing hardware for aerospace or other safety-critical applications. Familiarity with aerospace development and certification standards, including RTCA/DO-160, ARP4754A, and ARP4761. Experience supporting products through testing, qualification, and transition into production. Salary Range: $80,000-100,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience  All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

 

Position Summary

We are seeking a Mechanical Engineer II to support the design, development, and validation of mechanical hardware used in power conversion systems, electronic control units, and other advanced electronic products. In this role, you will contribute throughout the product lifecycle, from initial concept and proposal development through product testing, manufacturing support, and continuous improvement. The ideal candidate has experience designing mechanical components for electronic assemblies and enjoys working in a collaborative engineering environment.

Key Responsibilities

  • Develop mechanical designs for electronic enclosures, mounting systems, and structural components that satisfy customer specifications, performance goals, and manufacturing requirements.
  • Create and maintain detailed 3D CAD models and production drawings while applying engineering principles such as tolerance analysis and dimensional control.
  • Design products in accordance with applicable engineering standards, including GD&T, design for manufacturability (DFM), and company design practices.
  • Participate in design reviews and cross-functional engineering meetings, providing technical feedback to improve product performance, manufacturability, quality, and reliability.
  • Support engineering programs by completing assigned work within established project schedules and budget expectations.
  • Review technical documentation and customer requirements while contributing to engineering estimates, design documentation, bills of materials, validation plans, qualification procedures, and technical reports.
  • Investigate engineering challenges associated with existing products and new developments, recommending practical solutions to technical issues.
  • Provide regular project updates to engineering leadership, identifying potential risks and recommending mitigation strategies when appropriate.
  • Assist with product verification activities, prototype evaluations, and engineering testing for both new and existing designs.
  • Promote a safe working environment by following established health, safety, and environmental policies and supporting continuous improvement initiatives.
  • Travel occasionally within the United States and internationally (typically one to two trips annually) as project needs require.
  • Support project schedules that may occasionally require overtime or evening work during critical development phases.

Required Qualifications

  • Bachelor's degree in Mechanical Engineering or a related engineering discipline.
  • Minimum of three years of experience in mechanical product design within a manufacturing or new product development environment.
  • This position requires access to export-controlled information. Applicants must qualify as a U.S. Person in accordance with U.S. export control regulations (ITAR/EAR).

Required Skills

  • Strong understanding of mechanical engineering fundamentals and product design practices.
  • Experience creating and interpreting engineering drawings, including the application of GD&T.
  • Proficiency using 3D CAD software to develop components, assemblies, and manufacturing drawings.
  • Ability to apply sound engineering judgment and analytical thinking to technical challenges.
  • Effective problem-solving and troubleshooting abilities.
  • Strong communication and interpersonal skills with the ability to collaborate across engineering, manufacturing, and customer teams.
  • Well-organized with the ability to manage multiple priorities and maintain accurate technical documentation.
  • Proficient with Microsoft Office applications.
  • Experience using standard mechanical measuring instruments and basic shop tools.
  • Experience using CATIA for mechanical design.
  • Background designing hardware for aerospace or other safety-critical applications.
  • Familiarity with aerospace development and certification standards, including RTCA/DO-160, ARP4754A, and ARP4761.
  • Experience supporting products through testing, qualification, and transition into production.

 

Salary Range: $80,000-100,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

 

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job