ALTEN Technology USA

Interior Devices and Sensors Design and Release Engineer

Listed by employer · Checked

Older posting · still listed ·

  • Workplace not specified
  • Engineering
  • Auburn Hills, Michigan, United States
  • Troy, Michigan, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗
This is an older posting.

The employer’s posting date is more than 60 days ago. It remained listed at our last successful check; it may be a long-running or evergreen opening. Confirm availability on the original posting before applying.

Browse jobs posted in the past 60 days →

Requirements

1 with evidence8 unclear or unstated
Remote policy
onsite
“Due to in office work requirements, the candidate must be onsite at Auburn Hills, Michigan or at a local suppliers facility a minimum of 3 days per week.”
See matched passage in original description ↓
10 fields not stated in this posting
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Minimum experience (years)
Not specified
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
Job Description:  The BCI Mechatronics Design and Release Engineer (DRE) will be responsible for the integrated Center Stack (ICS) Switchbank design, development, packaging, testing and releasing. The DRE will interface with various stakeholders to define the component level & vehicle level functional specifications.  Responsibilities include but not limited to Develop & ensure that the ICS is compliant to all component level specifications. Participate in Product Assurance Planning (Program Management). Manage the supplier of the component; and component DFMEA (Design Failure Mode Effects Analysis), DVRR (Design Validation and Reliability Report), and Timing Proactive Quality Plan. Participate in Reactive Quality Problem Solving and will be supporting Supplier Quality during Process Sign-off (PS) and PFMEA reviews (Process Failure Mode Effects Analysis). Responsible for releasing components via Change Management System (CN's) and will interface with EMEA, APAC and LATAM counterparts on global commonality. Responsible for root causing & resolving launch, serial life and quality issues related to the ICS using the Global Issues Management System (GIMS). Requirements: Bachelor of Science in Electrical or Mechanical Engineering (or equivalent) from an ABET accredited university. 3+ years of switch and/or electronic ECU development and releasing experience. Full understanding of automotive electronic ECU development process. Experience managing or developing embedded software. Strong leadership skills (prepared to lead a supplier team). Due to in office work requirements, the candidate must be onsite at Auburn Hills, Michigan or at a local suppliers facility a minimum of 3 days per week. Must be willing to travel to Mexico (supplier plant), and any Client Assembly plants in Canada or Mexico. Experience with switches  Preferred Requirements: Master of Science degree in Mechanical or Electrical Engineering from an ABET accredited university. Experience managing suppliers and/or engineers. Familiar with Ethernet, CAN/CAN-FD and/or LIN bus communication protocols. Outstanding communication and organization skills. Travel and Driving Requirements: Will be required to drive a company car. Valid driver’s license is required as well as a clean driving record. Will be required to travel domestically and internationally up to 20% Additional Information / Must Have's: Working knowledge of Design & Process Failure Mode & Effects Analysis (DFMEA / PFMEA), Design Verification Plan & Report (DVP&R), Teamcenter CAE, GD&T & working knowledge of injection mold tooling. Knowledge & experience in Design For Six Sigma (DFSS) Proactive quality tools and Shainin Red X reactive quality tools. Strong organizational, program management, leadership and communication skills required. Proficient in Microsoft Excel, Word & PowerPoint. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

 

Job Description: 

  • The BCI Mechatronics Design and Release Engineer (DRE) will be responsible for the integrated Center Stack (ICS) Switchbank design, development, packaging, testing and releasing.
  • The DRE will interface with various stakeholders to define the component level & vehicle level functional specifications. 

Responsibilities include but not limited to

  • Develop & ensure that the ICS is compliant to all component level specifications.
  • Participate in Product Assurance Planning (Program Management).
  • Manage the supplier of the component; and component DFMEA (Design Failure Mode Effects Analysis), DVRR (Design Validation and Reliability Report), and Timing Proactive Quality Plan.
  • Participate in Reactive Quality Problem Solving and will be supporting Supplier Quality during Process Sign-off (PS) and PFMEA reviews (Process Failure Mode Effects Analysis).
  • Responsible for releasing components via Change Management System (CN's) and will interface with EMEA, APAC and LATAM counterparts on global commonality.
  • Responsible for root causing & resolving launch, serial life and quality issues related to the ICS using the Global Issues Management System (GIMS).

Requirements:

  • Bachelor of Science in Electrical or Mechanical Engineering (or equivalent) from an ABET accredited university.
  • 3+ years of switch and/or electronic ECU development and releasing experience.
  • Full understanding of automotive electronic ECU development process.
  • Experience managing or developing embedded software.
  • Strong leadership skills (prepared to lead a supplier team).
  • Due to in office work requirements, the candidate must be onsite at Auburn Hills, Michigan or at a local suppliers facility a minimum of 3 days per week.
  • Must be willing to travel to Mexico (supplier plant), and any Client Assembly plants in Canada or Mexico.
  • Experience with switches 

Preferred Requirements:

  • Master of Science degree in Mechanical or Electrical Engineering from an ABET accredited university.
  • Experience managing suppliers and/or engineers.
  • Familiar with Ethernet, CAN/CAN-FD and/or LIN bus communication protocols.
  • Outstanding communication and organization skills.

Travel and Driving Requirements:

  • Will be required to drive a company car. Valid driver’s license is required as well as a clean driving record.
  • Will be required to travel domestically and internationally up to 20%

Additional Information / Must Have's:

  • Working knowledge of Design & Process Failure Mode & Effects Analysis (DFMEA / PFMEA), Design Verification Plan & Report (DVP&R), Teamcenter CAE, GD&T & working knowledge of injection mold tooling.
  • Knowledge & experience in Design For Six Sigma (DFSS) Proactive quality tools and Shainin Red X reactive quality tools.
  • Strong organizational, program management, leadership and communication skills required.
  • Proficient in Microsoft Excel, Word & PowerPoint.

 

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job