ALTEN Technology USA

Design Release Engineer - Wiper / Washer Systems

Listed by employer · Checked

Posted within 60 days ·

  • Workplace not specified
  • Engineering
  • Auburn Hills, Michigan, United States
  • Troy, Michigan, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗

Requirements

2 with evidence7 unclear or unstated
Remote policy
onsite
“Launch Support: Provide on-site engineering support at manufacturing plants during pilot vehicle builds and production launches to resolve fit, finish, or functional performance issues”
See matched passage in original description ↓
Minimum experience (years)
3
“Experience: Typically requires 3 to 5+ years of experience as a product, component, or design release engineer within the automotive industry.”
See matched passage in original description ↓
9 fields not stated in this posting
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
Job Description: The engineer is responsible for the design, development, validation, and production release of wiper mechanisms, blades, arms, washer reservoirs, pumps, hoses, and nozzles for global vehicle programs. Below is the standard layout of the job description, detailing the responsibilities, requirements, and key tools for this position. Key Responsibilities Component Ownership: Lead the engineering design, development, packaging, and production release of wiper and washer subsystems from concept through full volume production. Cross-Functional Integration: Coordinate seamlessly with interfacing vehicle commodities, including Body-in-White (BIW), Electrical/Electronics (EE), Software, and Styling/Product Design Office (PDO). Supplier Management: Function as the single point of contact for external suppliers, managing their delivery timelines, engineering progress, and first-piece sign-offs. Quality & Validation: Build and execute the Design Verification Plan & Report (DVP&R), develop Design Failure Mode & Effects Analysis (DFMEA), and ensure the system meets performance, packaging, and regulatory requirements. [1, 2, 3] Change Management: Author, track, and validate engineering change notices (ECN/ECR) and manage the Bill of Materials (BOM Launch Support: Provide on-site engineering support at manufacturing plants during pilot vehicle builds and production launches to resolve fit, finish, or functional performance issues Continuous Improvement: Perform root-cause analysis on field warranty data and implement cost-optimization or weight-reduction actions Required Qualifications Education: Bachelor of Science in Mechanical Engineering, Aerospace Engineering, Automotive Engineering, or a closely related ABET-accredited discipline. Experience: Typically requires 3 to 5+ years of experience as a product, component, or design release engineer within the automotive industry. Domain Knowledge: Proven track record in developing fluidic systems, electromechanical linkages, or similar exterior hardware components. Quality Standards: Practical understanding of Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) workflows. Soft Skills: Strong project management abilities, proactive problem-solving skills, and the capacity to negotiate complex supplier relationships under tight program timelines Preferred Qualifications Direct product experience with wiper motor electronics, fluid dynamics (washer delivery), or glass packaging. Design for Six Sigma (DFSS) Green Belt or Black Belt certification. Experience handling international vehicle program rollouts. Core Systems & Technical Tools CAD Software: NX or CATIA for 3D modeling, packaging, and drawing generation. Product Lifecycle Management: Teamcenter for managing data structures, geometry releases, and engineering changes. Internal Tools: Client internal change management platforms, GIMS/ISS for issue tracking, and AMPS sheets for assembly plant documentation. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

Job Description:

  • The engineer is responsible for the design, development, validation, and production release of wiper mechanisms, blades, arms, washer reservoirs, pumps, hoses, and nozzles for global vehicle programs.
  • Below is the standard layout of the job description, detailing the responsibilities, requirements, and key tools for this position.

Key Responsibilities

  • Component Ownership: Lead the engineering design, development, packaging, and production release of wiper and washer subsystems from concept through full volume production.
  • Cross-Functional Integration: Coordinate seamlessly with interfacing vehicle commodities, including Body-in-White (BIW), Electrical/Electronics (EE), Software, and Styling/Product Design Office (PDO).
  • Supplier Management: Function as the single point of contact for external suppliers, managing their delivery timelines, engineering progress, and first-piece sign-offs.
  • Quality & Validation: Build and execute the Design Verification Plan & Report (DVP&R), develop Design Failure Mode & Effects Analysis (DFMEA), and ensure the system meets performance, packaging, and regulatory requirements. [1, 2, 3]
  • Change Management: Author, track, and validate engineering change notices (ECN/ECR) and manage the Bill of Materials (BOM
  • Launch Support: Provide on-site engineering support at manufacturing plants during pilot vehicle builds and production launches to resolve fit, finish, or functional performance issues
  • Continuous Improvement: Perform root-cause analysis on field warranty data and implement cost-optimization or weight-reduction actions

Required Qualifications

  • Education: Bachelor of Science in Mechanical Engineering, Aerospace Engineering, Automotive Engineering, or a closely related ABET-accredited discipline.
  • Experience: Typically requires 3 to 5+ years of experience as a product, component, or design release engineer within the automotive industry.
  • Domain Knowledge: Proven track record in developing fluidic systems, electromechanical linkages, or similar exterior hardware components.
  • Quality Standards: Practical understanding of Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) workflows.
  • Soft Skills: Strong project management abilities, proactive problem-solving skills, and the capacity to negotiate complex supplier relationships under tight program timelines

Preferred Qualifications

  • Direct product experience with wiper motor electronics, fluid dynamics (washer delivery), or glass packaging.
  • Design for Six Sigma (DFSS) Green Belt or Black Belt certification.
  • Experience handling international vehicle program rollouts.

Core Systems & Technical Tools

  • CAD Software: NX or CATIA for 3D modeling, packaging, and drawing generation.
  • Product Lifecycle Management: Teamcenter for managing data structures, geometry releases, and engineering changes.
  • Internal Tools: Client internal change management platforms, GIMS/ISS for issue tracking, and AMPS sheets for assembly plant documentation.

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job