ALTEN Technology USA

Aerospace Wire Harness Engineer

Listed by employer · Checked

Posted within 60 days ·

  • Workplace not specified
  • Engineering
  • Mountain View, California, United States
  • Irvine, California, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗

Requirements

1 with evidence8 unclear or unstated
Remote policy
hybrid
“Location: On-site in Mountain View, CA (preferred), Potential for Hybrid”
See matched passage in original description ↓
10 fields not stated in this posting
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Minimum experience (years)
Not specified
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
Location: On-site in Mountain View, CA (preferred), Potential for Hybrid Job Duration: 9 months, with potential extension to a long-term role if candidate is strong in PCB design Salary: $120-150k Our client is the first non-military unmanned aircraft company to receive FAA Type Certification (2022) and operate under an FAA Production Certificate. We're seeking a Harnessing Engineer to own the electrical interconnect for our M3 aircraft, docks, and portals — from wiring diagrams through prototype builds, supplier production, and qualification. Responsibilities      • Own harness architecture and design, from wiring diagrams and formboard drawings through release     • Route harnesses in 3D CAD with Mechanical, managing bend radii, clamping, chafe protection, and weight     • Define power distribution, grounding, and shielding; perform wire sizing, voltage-drop, and derating analysis     • Select wire, connectors, and protection for vibration, thermal, moisture, and EMI environments     • Build and debug prototype harnesses hands-on and write build instructions for technicians     • Manage harness suppliers through DFM, first article inspection, and corrective action Required Qualifications      • BS in Electrical, Mechanical, or Aerospace Engineering (or related)     • 6+ years of wire harness design on aerospace, UAV, automotive, or complex electromechanical products     • Proficiency in a harness CAD tool (e.g., SolidWorks Electrical) and SolidWorks     • Working knowledge of IPC/WHMA-A-620 and SAE AS50881 (or equivalent)     • Hands-on harness fabrication, crimping, and continuity/hipot testing Preferred Qualifications      • UAV, eVTOL, or certified aircraft experience; familiarity with EWIS and ASTM F38 practices     • DO-160 / MIL-STD-461 environmental and EMI testing experience     • Experience transitioning harnesses to contract manufacturers for volume production Salary Range     • $120,000 - 150,000     • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience  All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

Location: On-site in Mountain View, CA (preferred), Potential for Hybrid
Job Duration: 9 months, with potential extension to a long-term role if candidate is strong in PCB design
Salary: $120-150k

Our client is the first non-military unmanned aircraft company to receive FAA Type Certification (2022) and operate under an FAA Production Certificate. We're seeking a Harnessing Engineer to own the electrical interconnect for our M3 aircraft, docks, and portals — from wiring diagrams through prototype builds, supplier production, and qualification.

Responsibilities 
    • Own harness architecture and design, from wiring diagrams and formboard drawings through release
    • Route harnesses in 3D CAD with Mechanical, managing bend radii, clamping, chafe protection, and weight
    • Define power distribution, grounding, and shielding; perform wire sizing, voltage-drop, and derating analysis
    • Select wire, connectors, and protection for vibration, thermal, moisture, and EMI environments
    • Build and debug prototype harnesses hands-on and write build instructions for technicians
    • Manage harness suppliers through DFM, first article inspection, and corrective action

Required Qualifications 
    • BS in Electrical, Mechanical, or Aerospace Engineering (or related)
    • 6+ years of wire harness design on aerospace, UAV, automotive, or complex electromechanical products
    • Proficiency in a harness CAD tool (e.g., SolidWorks Electrical) and SolidWorks
    • Working knowledge of IPC/WHMA-A-620 and SAE AS50881 (or equivalent)
    • Hands-on harness fabrication, crimping, and continuity/hipot testing

Preferred Qualifications 
    • UAV, eVTOL, or certified aircraft experience; familiarity with EWIS and ASTM F38 practices
    • DO-160 / MIL-STD-461 environmental and EMI testing experience
    • Experience transitioning harnesses to contract manufacturers for volume production

Salary Range
    • $120,000 - 150,000
    • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job