ALTEN Technology USA

Aerospace Manufacturing Engineer (Composites)

Listed by employer · Checked

Older posting · still listed ·

  • Workplace not specified
  • Engineering
  • Lansing, Michigan, United States
  • Troy, Michigan, United States
Work arrangement
Not stated
Employment
Not stated
Stated compensation
Not specified
Stated sponsorship
Not stated
Apply on company website ↗
01 / A QUICK CHECK BEFORE YOU APPLY

Does the location policy fit?

Choose where you would work from. We’ll compare it with the posting’s stated requirements.

Choose the country you will work from. You can change this anytime.

Country and sponsorship changes take effect when you click Check eligibility.

Choose a country to check geographic compatibility. The source requirements are available below.

Source: greenhouseChecked Original posting ↗
This is an older posting.

The employer’s posting date is more than 60 days ago. It remained listed at our last successful check; it may be a long-running or evergreen opening. Confirm availability on the original posting before applying.

Browse jobs posted in the past 60 days →

Requirements

1 with evidence8 unclear or unstated
Minimum experience (years)
10
“A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience”
See matched passage in original description ↓
10 fields not stated in this posting
Remote policy
Unclear
Employer sponsorship
Not specified
Geographic scope
Not specified
Degree requirement
Not specified
Security clearance
Not mentioned
Timezone / hours
Not specified
Citizenship requirement
Not mentioned
Work authorization
Not specified
Employment type
Not specified
Compensation
Not specified

These details were not stated in the tracked posting. Confirm with the employer.

READ IT IN THE EMPLOYER’S OWN WORDS

Original job description

Reading view uses normalized posting text so exact evidence excerpts can be highlighted.

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.
Read full descriptionShow less description
Job Description: ALTEN Technology is excited to announce an opening for a Ground Test Manufacturing Engineer.  This role offers a unique opportunity to work in a specialized field within engine design and operations.   Ground Test Division designs, manufactures and services test equipment to support development and aftermarket engine programs for all three major engine manufacturers.    This work involves design and manufacture of final level assemblies and all subcomponents and details.  As a Ground Test Manufacturing Engineer, you will be responsible for developing manufacturing processes and tooling design for composite parts fabrication using approved models and drawings.   You will support production activities, troubleshoot issues, and implement process improvements to ensure efficient and high-quality manufacturing for the three to six month build schedules.    You may be tasked with evaluating any damage from normal operations by our customers and developing repairs to restore the assembly or components to original or acceptable requirements.   What You Will Do: Create written and illustrated manufacturing instructions, bills of material and outside purchase specifications per engineering drawings/specifications. Develop and improve manufacturing processes and tooling for composite parts Work with production teams to ensure manufacturability and suggest improvements. Train production staff in new processes and techniques. Providing manufacturing support to design throughout conceptual, preliminary, and detailed design phases, to include validation, customer approval, manufacturing, and operational service. Support design with material selection based on usability and compatibility with current processes and equipment. Review and disposition nonconforming material to technical requirements. Develop and validate repair processes in conjunction with design team. Contribute to Cost of Poor Quality efforts, challenge existing processes, and drive improvements. Ensure compliance with established engineering methodologies Use sound engineering judgment, technical expertise, and data analysis to make decisions or solve moderately complex tasks or problems. Qualifications You Must Have: A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience A Science, Technology, Engineering or Mathematics (STEM) Advanced Degree in a related field and minimum 8 years experience Effective problem identification and solution skills Strong project ownership, execution, and proactive mentalities Experience with mechanical manufacturing processes (machining, joints, fasteners, welding) in relevant industry positions (aerospace, defense, automotive or similar) Experience with GD&T and print interpretation. Experience with fiber-reinforced polymer composites, specifically: fiberglass, aramid, and/or carbon prepreg and wet layup (especially epoxy resin systems) Experience in advanced Composite and Bonded Structures manufacturing (ie. Fiber Reinforcement, Curing, Ovens and Autoclaves, Adhesives, Surface Preparation, etc.)  Qualifications We Prefer: Computer Aided Design Software experience: Creo / Windchill (Preferred) or NX / FiberSIM / TeamCenter Familiarity with Non-Destructive Testing (NDT) techniques, such as ultrasonic testing, eddy current, FPI, camera optics, X-ray and others used in aerospace. Experience with design for manufacturing & assembly Understanding of manufacturing cost and reproducibility Experience with implementation of PFMEAs All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.
Original formatting and links

We’re ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you’ll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

 

Job Description:
  • ALTEN Technology is excited to announce an opening for a Ground Test Manufacturing Engineer. 
  • This role offers a unique opportunity to work in a specialized field within engine design and operations.  
  • Ground Test Division designs, manufactures and services test equipment to support development and aftermarket engine programs for all three major engine manufacturers.   
  • This work involves design and manufacture of final level assemblies and all subcomponents and details. 
  • As a Ground Test Manufacturing Engineer, you will be responsible for developing manufacturing processes and tooling design for composite parts fabrication using approved models and drawings.  
  • You will support production activities, troubleshoot issues, and implement process improvements to ensure efficient and high-quality manufacturing for the three to six month build schedules.   
  • You may be tasked with evaluating any damage from normal operations by our customers and developing repairs to restore the assembly or components to original or acceptable requirements.  
What You Will Do:
  • Create written and illustrated manufacturing instructions, bills of material and outside purchase specifications per engineering drawings/specifications.
  • Develop and improve manufacturing processes and tooling for composite parts
  • Work with production teams to ensure manufacturability and suggest improvements.
  • Train production staff in new processes and techniques.
  • Providing manufacturing support to design throughout conceptual, preliminary, and detailed design phases, to include validation, customer approval, manufacturing, and operational service.
  • Support design with material selection based on usability and compatibility with current processes and equipment.
  • Review and disposition nonconforming material to technical requirements.
  • Develop and validate repair processes in conjunction with design team.
  • Contribute to Cost of Poor Quality efforts, challenge existing processes, and drive improvements.
  • Ensure compliance with established engineering methodologies
  • Use sound engineering judgment, technical expertise, and data analysis to make decisions or solve moderately complex tasks or problems.
Qualifications You Must Have:
  • A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience
  • A Science, Technology, Engineering or Mathematics (STEM) Advanced Degree in a related field and minimum 8 years experience
  • Effective problem identification and solution skills
  • Strong project ownership, execution, and proactive mentalities
  • Experience with mechanical manufacturing processes (machining, joints, fasteners, welding) in relevant industry positions (aerospace, defense, automotive or similar)
  • Experience with GD&T and print interpretation.
  • Experience with fiber-reinforced polymer composites, specifically: fiberglass, aramid, and/or carbon prepreg and wet layup (especially epoxy resin systems)
  • Experience in advanced Composite and Bonded Structures manufacturing (ie. Fiber Reinforcement, Curing, Ovens and Autoclaves, Adhesives, Surface Preparation, etc.) 
Qualifications We Prefer:
  • Computer Aided Design Software experience: Creo / Windchill (Preferred) or NX / FiberSIM / TeamCenter
  • Familiarity with Non-Destructive Testing (NDT) techniques, such as ultrasonic testing, eddy current, FPI, camera optics, X-ray and others used in aerospace.
  • Experience with design for manufacturing & assembly
  • Understanding of manufacturing cost and reproducibility
  • Experience with implementation of PFMEAs

 

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

Matched by role category. Review each posting’s requirements before applying.

THE JOB ELIGIBILITY CHECKER

Check a job